What are the Features of Steel Door?

09 Jul What are the Features of Steel Door?

While producing steel doors, steel flat and sheet metal are used. It is a solid type of door designed with hard materials, equipped with special security measures, and difficult to open with any force from the outside as a result of using the right material. While steel doors designed with high security measures were used in villa-style houses in the early 2000s, they started to be used in building entrances and apartment doors towards the end of the 2000s. With the decrease in the prices of steel doors in the ongoing years, steel doors have been used in detached houses as well. As a result of the increasing distrust of wooden doors, steel doors have started to be preferred. However, the use of missing materials in steel doors or the use of mild steel materials in order to reduce their price reduces the security level of steel doors compared to wooden doors. As Beyoğlu Steel Door, we attach importance to security in all kinds of steel door models we have designed. Some additional measures should be taken to increase the security level of steel doors.

Many thefts happen by accessing the lock part from the outside or through the doorway. It is possible to prevent access to the lock from the outside with the cylinder protective system on steel doors. Increasing the number of locks on the doors used does not mean increasing your security. On the contrary, excessive number of locks can cause damage to steel doors. Because the lock systems in steel doors are controlled from a single point. Increasing the number of points does not mean that each lock will be controlled separately. Since the lock system is controlled from a single center, when one of the locks is opened, the other locks connected to it also open. For this, instead of increasing the center of the lock or using the steel door plate, you can prevent access to the lock against external forces by using a cylinderless lock or steel welded cylinder protectors. So what are the features of a good steel door?

Steel Door Features

• Steel doors should be manufactured from 1.5 mm steel profiles in accordance with production and assembly standards. These dimensions can reach up to 3.5 mm thickness at the security points. Frame structures should be able to grasp the wall so that there is no gap between the wall and the frame.

• Lock systems should be reinforced against external interventions.

• Lock system or cylinder protectors must be strong, durable and of proven quality against punctures.

• The thickness of the wing body should not be less than 8 cm.

• The angle of the surveillance scope should be wide and the lock center should be supported by fixed shafts.

• Electrostatic sheet metal paint should be used.

• It should have chrome steel hinges and stainless chrome interior/exterior accessories.

• The door to be used must be manufactured according to the place to be installed.

• The assembly of the manufactured door should be done in balance and properly.

A good steel door must have these listed features. Among the steel door features, these features should be sought before purchasing and preferences should be made in this direction. A few features found can be evaluated as decorative. For example; it can be said that the wood on the wing surface is completely optional. But if it is preferred, it answers the question of how a good steel door should be. All the listed features should be considered as common features that should be in a good steel door. These features, which are brought together during manufacturing, allow you to have a steel door that you can use safely and securely for many years for your areas that require protection. Before buying a steel door for your living spaces and personal safety, be sure to check the features of a good steel door. Do not forget to get information about the warranty certificate and installation for your door from the seller company. Make sure that the assembly team is experts in their field and that the assembly is done in accordance with the measurements taken.