How Should The Steel Door Dimensions Be?

07 Sep How Should The Steel Door Dimensions Be?

How should the steel door dimensions be? Steel door dimensions are produced according to a standard measurement unit. According to standard steel door dimensions; the width of the door is 90cm, the height of the door is 200cm and the wall thickness is between 15-25cm. Of course, it should not be forgotten that these dimensions may vary, albeit with a small difference, according to the companies. If there is no place where the steel door will be installed, it should be built with a brick measuring 10cm so that there is no blank Wall.

The purpose of building a Wall is to ensure that the frames of the steel door can be attached to the blank Wall. It should be noted that the width between the two bricks is 95cm. The height measurement should be left as 215cm without screed. If the screed is laid, this height measurement should be left at 205 cm. The thickness of the Wall should be built with a 13cm wide brick.

Taking a Steel Door Measurement

Since the topic “ How should the steel door dimensions be?” is explained, it should not be forgotten to take the measure of the steel door. Before purchasing a steel door, it is necessary to pay attention to some details. Some of them are;

1. Height Measuring

If a steel door is not installed for the first time, it will be most useful to measure over the old steel door. It is extremely important to hold the meter from the point where the floor starts and make a measurement to the point where it does not come to the frame. If the height measurement is taken with this method, an accurate measurement will definitely be taken.

• Width Measuring

When measuring width, as when measuring height, the frame is not included in the measurement. When measuring width, the interior of the old case is measured. The sides of the door are not included in this measurement. If the width of the door cannot be measured correctly, measuring the height will not help, because the width of the Wall will not be compatible with the door and all these calculations will have to be done again.

• Frame Measuring

In general, frames have a standard size. However, these measurements may Show different measurement measurement units from time to time due to the architecture of the house. In order to measure the size of the steel door frame exactly and to avoid problems later, the frame areas should be measured separately. Although the general dimensions of steel doors are standard, the opening side of the doors is always changing. For this reason, the thing that must be checked in the area where a steel door is placed is the opening direction of the steel door. Flexibility of the steel door to be positioned should be considered. As Beyoğlu Steel Door, we are always at your service to meet your needs and maket he necessary measurements correctly.